Quantcast

Before & After Photos

Click on a photo to enlarge.

Canyon, MN Cabin Insulated to Prep for Year-Round Use

This cabin in Canyon, MN was only used during the summer months. The owners were planning to transition to living there year-round, but knew they would need to winterize the cabin. Looking for a permanent solution to make their home more comfortable year-round, they reached out to DBS for a permanent solution.

Our Service Manager Jacob Nustad-Peluso was the Design Specialist for this project. He visited the home and provided a free, no-obligation estimate, inspecting the cabin's attic and crawl space. After inspecting the property and conducting an energy audit, it was determined that air sealing and blown-in insulation were necessary to effectively winterize the cabin.

DBS Foreman Nick Woods II and his crew performed the work crawl space air sealing and installed attic insulation. Our production crew first removed the existing fiberglass insulation and sealed the gaps in building material and spaces surrounding the attic ducts with a layer of closed-cell spray foam. From there, they blew-in a heavy layer of our TruSoft™ cellulose into the space. TruSoft™ has a higher R-value than fiberglass and other cellulose materials and will work wonders to protect the space. 

For the crawl space, our team removed debris, and applied a MoldX2 Botanical™ to the moldy wooden support beams. From there, they used SilverGlo™ insulation on the crawl space foundation walls, and spray foam to seal the rim joists.

Sealing and insulating the crawl space and attic was key to prevent warm air from escaping the home, and improves the overall energy-efficiency and health of the space. 

Air Sealing and Insulation Stops Ice Dams in Duluth, MN Home

Homeowners in Duluth, MN had issues with cold and drafty rooms in their home. Uncomfortable conditions paired with ice dams on the roof prompted them to contact DBS.

Sales Manager Jacob Nustad-Peluso was the Design Specialist for the project and went to the home to provide a free, no-obligation estimate. After inspecting the property and conducting an energy audit, it was determined that air sealing and blown-in insulation were necessary to effectively seal and insulate the space.

Our production crew first removed the existing fiberglass insulation and sealed the gaps in building material and spaces surrounding the attic ducts with a layer of closed-cell spray foam. From there, they blew-in a heavy layer of our TruSoft™ cellulose into the space. TruSoft™ has a higher R-value than fiberglass and other cellulose materials and will work wonders to protect the space. 

Sealing the attic was key to prevent warm air from escaping the home, and improves the overall energy-efficiency and health of the space. 

Superior, WI Homeowner Insulate Attic to Stop Ice Dams

This 1930's home had been cold and drafty since the family moved in in the 90's. Cold floors and rooms lead to discomfort during cold Wisconsin winters. Additionally, heat was escaping via the attic causing ice dams and condensation problems in the upper living space. After working with DBS a few years back on another project, they decided to have us completely re-insulate their attic. 

DBS Design Specialist Henry Jungbauer is an expert in our Dr. Energy Saver® insulation services. He visited the home to take thorough measurements of the attic space, targeting heat loss with a thermal imaging camera. Nick Woods II and his insulation team installed a combination of spray foam to air seal and insulate the roof deck as well as 18 inches of Tru-Soft cellulose. 

The home owners will soon see a reduction in energy bills and increase in whole-home comfort!

Duluth, MN Homeowners Prevent Ice Dams and Increases Comfort with Attic Insulation

A Duluth, MN couple contacted DBS for help in preventing ice dams from forming on their home. Knowing that this is a symptom of energy loss in the home, they figured a permanent solution would make their home more comfortable as well. 

DBS Design Specialist Henry Jungbauer is an expert in our Dr. Energy Saver® solutions. After completing a thorough inspection of the attic, he provided the family with a free, no-obligation estimate for the work. He noticed frost and signs of water leaking in the attic, in areas consistent with the ice dams and cold rooms. 

DBS Foreman Nick Woods II and his insulation crew completed the attic project. They first removed the existing fiberglass batting insulation, and applied a layer of spray foam to the attic floor for air seal and to prevent energy loss. From there, they applied 18 inches of cellulose insulation. DBS uses Tru-Soft cellulose, a light, yet dense material that has an R-value as high as 4 per inch. 

The homeowners now have a solid solution to keep their home comfortable and reduce their energy bills!

Foundation Support and Encapsulation for Couderay, WI Cabin

Owners of this Courderay, WI cabin dreamt of using their space year-round. With some signs of settling in the foundation and cold floors in the wintertime, they were interested in learning more about our crawl space encapsulation service. 

DBS Design Specialist Steve LaFontaine visited the home to provide a free, no-obligation estimate for the project. He assessed the structural concerns, as well as the crawl space. He worked with the cabin owners to design a plan that would increase their year-round comfort and maintain their property value for years to come. 

DBS Foreman Nick Burley led this crawl space project. He and his team installed 4 SmartJack® support beams in order to restore the cabin to a level position. From there, they installed our 3-layer system for crawl space encapsulation. First, drainage matting to eliminate moisture buildup, TerraBlock™ crawl space insulation, and CleanSpace® vapor barrier. These three products work together to fully protect the crawl space and condition spaces around them from the effects of cold air and moisture. 

Our Products
Finishing Ideas
About
Learning Center
Become a Dealer
Free Estimate