Before & After Photos

This basement had a problem with flooding so we installed an open sump pump and a SaniDry Sedona. These pair up to create low relative humidity, stop mold from growing, and most importantly help in case of a flood.

This customer in Holyoke, MA called for help with water damage in his basement. When we arrived, we realized that the basement was not insulated at all.

In order to properly insulate, we needed to first remove and treat areas affected by the water damage. Our team got to work removing the damaged parts of the basement. We also removed large areas of mold with our Mold-X2 Cleaner. Afterward, we immediately treated with Mold-X2 Botanical to prevent mold from growing back. Then, our team got to work insulating the walls. We installed Foamax™ insulation board on his walls. This was an important first step in preparing for basement finishing. 

This homeowner in Holyoke, MA reached out to us hoping that we would be able to help him with his basement windows. He needed them to be replaced, as one of the windows was broken. 

Luckily for this homeowner, we were able to help them out with this. We replaced the old and inefficient windows with our Everlast™ basement windows. These windows feature double pane glass that is treated to reduce heat flow in or out of the glass. They also have vinyl frames and sashes -- meaning they will not rust, rot, or need paint. Now, this homeowner has a much nicer looking set of basement windows, and the basement will be more comfortable! 

This homeowner in Holyoke, MA called us hoping that we would be able to help him with his attic insulation. He wanted it replaced before winter. 

We were able to help this customer! We started by removing the batt insulation, bagging it and bringing it out. We also removed the wooden boards and debris from the attic. We then began air sealing, making sure that all cracks and crevices were sealed. We used Zypfoam™ one part spray foam to air seal. We then used a long hose attached to a machine that blows our TruSoft™ cellulose insulation into the attic. TruSoft™ cellulose is able to fill all gaps and odd-shaped voids, as it is blown in insulation.

Now, this homeowner has a much more comfortable home! 

This homeowner called us saying that he had an issue with his attic insulation. He stated that it was quite cold during the winters and he would like it replaced.

We were able to help this customer! We started by removing the batt insulation, bagging it and bringing it out. We also removed the wooden boards and debris from the attic. We then began air sealing, making sure that all cracks and crevices were sealed. We used Zypfoam™ one part spray foam to air seal. We then used a long hose attached to a machine that blows our TruSoft™ cellulose insulation into the attic. TruSoft™ cellulose is able to fill all gaps and odd-shaped voids, as it is blown in insulation.

Now, this homeowner has a much more comfortable home!