Quantcast

Before & After Photos

Click on a photo to enlarge.

Crawl Space encapsulation in SouthWEst, Montreal

Before: A customer from SouthWest, Montreal started noticing that the floor of his upper house was sagging, in addition to Drywall cracks throughout the house.

 

After: Following the inspection of our specialist, our company has recommended the installation of a CleanSpace membrane, a SmartSump pump system, and SmartJack Pillars

This solution pleased this resident of Southwest because it has solved her problems in a short time and for a reasonable investment.

Stabilizing a crawl space in Montreal, Qc

The foundation of Mr. Diaz's house was slowly sagging. He knew that if he does nothing, his foundation will continue to sag. So he wanted to have it fixed before the problem gets worse. He decided to contact Système Sous-sol Québec to obtain a permanent solution.

The problem was that the ground under the foundation is weak and unstable. This caused movement of the wooden beams which support the weight of the house causing overload of weight and slits in the beams in several places. Because of this, the foundation was quietly sagging.

The solution for our client is to install SmartJack supports to support the joist reinforcement device in place. A hole is dug in the earth for each SmartJack installed and is filled with compacted fill to create a stable base. About ten brackets were installed in order to support the weight evenly and straighten the floor to the floor above in its initial position.

 With this solution, Mr. Diaz will have nothing more to fear for his foundation.

Crawl Space Repair in SouthWest, Montreal

We have repaired our Client’s crawl space in SouthWest Montreal after our client noticed his house floor was sagging.

Furthermore, we have Installed our company's  SmartJack Support Pillars which are steel support systems used to stabilized and level the girders and floor joists in a Crawlspace.

The SmartJAcks Support Pillar is the best system to lift above floors and walls back to their original position.

SmartJack system to stabilize a sagging floor

PROBLEM

Krystle, the owner of a house in Montreal, was facing issues due to complications with her floor. There were several areas incarnating floor slops. In addition, there some gaps between the floor and some of the interior wall. Our specialist Cesar visited Krystle for a free inspection. In addition to the bouncy floor, some doors and windows were stuck, making them difficult to open or close.

While inspecting the crawlspace, Cesar immediately felt the excess moisture. The wood began to rot and to become more and more weak. Consequently, the main beams and floor joists were unable to support the weight of the house, leading to sagging floor.

SOLUTION

Installing the SmartJack system to stabilize the floor joists in the crawlspace. In this case, it included six galvanized steel columns with a 16'' horizontal beam. What sets our SmartJack system apart is that the columns are adjustable depending on the size of each crawlspace. Additionally, galvanized steel is corrosion-resistant, thus ensuring the durability of the system. On the other hand, the installation of the columns and the horizontal beam is quick, with minimal disruption to the household.

 

Crawl Space repair in SouthWest Montreal

The residents of this house in SouthWest Montreal suffered from a very high level of humidity, caused by a non-isolated crawl space. In addition, they were concerned about a few sagging beams and the lack of inadequate support under these beams, which caused a subsidence at the top floor.

We made a complete repair of this house’s Crawl Space as you can see in this picture.

Our Products
Finishing Ideas
About
Learning Center
Become a Dealer
Free Estimate